It started as a full-width brush guard that came with the truck when I bought it. You can go to the CTD photo page to see what it looked like then. It was a nice piece of custom work by some welder in Oklahoma with the Initial “G”. But it weighed over 100lbs, and these Cummins pickups are real nose-heavy to start with. That design wasn’t gonna do much for any hard hits on the corners anyway, so I cut it down to just utilize the important part, now weighing around 40 pounds.
I suppose these type accessories are called Bull Bars, because they are designed to prevent the bull from putting his horns through your radiator. I did some grinding here and there and got it to fit a little better, contouring to the bumper quite nicely.
![](http://stuff.is-a-geek.net/PhotoAlbum/Cars/Pics/BullBar1.jpg)
![]() | ![]() | ![]() |