1. Press LOCK button 5 times at 2 second intervals to resynchronize remote.

2. Turn ignition to the RUN position and wait for ignition chimes to stop.

    NOTE: Steps 1 through 5 are accomplished with an orignal, working remote.

3. Press and hold the UNLOCK button on a working remote for 4 to 10 seconds.

4. Within the next 4 to 10 seconds, continue pressing the UNLOCK button and
     then press the PANIC button for 1 second and release both buttons. A chime will 
     sound to indicate remote programming mode has been entered.

5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons
     simultaneously then press and release just the UNLOCK button on the same remote.
     A chime will sound indicating the remote has been programmed.

   NOTE: The original remote (attached to the key in the ignition?) is now disabled.

6. Re-programming remotes:  Press and release the LOCK and UNLOCK buttons
    simultaneously and then press the UNLOCK button on all the remotes needing
    programmed, to include the one used to place the system in programming mode.
    A chime will sound afer each additional remote is programmed.

7. Test Remotes.