Phoebe 1,
2, 3,
4 Catalogs
'n Manuals
Hardening
| Chapter 4. Installation and Hardware ConfigurationThis chapter will detail the procedures needed to install Red Hat 6.1 onto an Intel system; the procedures are similar whether you choose to install using either GUI- or text-based installation. Since much of this information is already well documented in the Red Hat User's Guide (provided as a paper manual in the “Official” boxed sets, included in the ``/doc'' directory on the CD, as well as available online at ftp://ftp.redhat.com/pub/redhat/redhat-6.1/i386/doc/rhinst/index.htm), I've skimmed over much of the details. However, there are a few things which I think are lacking in the Red Hat guide, and therefore I will attempt to cover those items in greater detail. Creating an Installation DisketteThe first step in getting Red Hat's distribution of Linux onto a system, you need to find a way of starting the installation program. The usual method of doing so is to create an installation disk, although if you are installing from CD-ROM, and your system's BIOS supports it, you should be able to boot directly into the installation program from the CD. Otherwise, to create an installation diskette, you'll need to copy the ``boot.img'' (which is simply an image of an ext2-formatted Linux boot diskette with an additional installation program) onto a floppy diskette. The ``boot.img'' file can be obtained from the /images directory of the Red Hat CD-ROM disk, or downloaded via FTP from ftp://ftp.redhat.com in the /pub/redhat/redhat-6.1/i386/images directory (assuming you are installing Linux on an Intel box). You can create the boot diskette either from a DOS or Windows system, or from an existing Linux or Unix system. For your destination diskette, you can use either an unformatted or a pre-formatted (for DOS) diskette -- it makes no difference. Under DOS: Assuming your CD-ROM is accessible as drive D:, you can type:
Under Linux/Unix: Assuming the ``boot.img'' file is located in the current directory (you may need to mount the CD-ROM under /mnt/cdrom and find the file in /mnt/cdrom/images), you can type:
With either of the above schemes, you should now have a bootable Red Hat 6.1 installation diskette that you can use to install your new Red Hat Linux system! |