= jumpered 
= unjumpered
| BIOS | 
(default) |
Reserved. Do not change. |
| NICRST | (default) |
Reserved. Do not change. |
| PSWD | 
(default) |
The password features are enabled. The password features are disabled. |
| 100 | |
Reserved. Do not change. |
| 133* | |
Jumpered when the processor's internal speed is 133 MHz. |
| 166* | |
Jumpered when the processor's internal speed is 166 MHz. |
| 200* | |
Jumpered when the processor's internal speed is 200 MHz. |
| 233* | |
Jumpered when the processor's internal speed is 233 MHz. |
*One set of the speed jumper pins must have a jumper plug installed; otherwise, the system operates at an undetermined speed.
 |
NOTE: When upgrading to a 233-MHz microprocessor, set the jumper to 100 MHz on system board part number 81004. |