Keywords for the ps command.
Multiple keywords may be space or comma separated.
%cpu The cpu utilization of the process; this is a decaying average
over up to a minute of previous (real) time. Since the time base
over which this is computed varies (since processes may be very
young) it is possible for the sum of all %CPU fields to exceed 100%.
%mem The percentage of real memory used by this process.
flags The flags associated with the process as in the include file
:
P_ADVLOCK 0x00001 Process may hold a POSIX advisory
lock
P_CONTROLT 0x00002 Has a controlling terminal
P_INMEM 0x00004 Loaded into memory
P_NOCLDSTOP 0x00008 No SIGCHLD when children stop
P_PPWAIT 0x00010 Parent is waiting for child to
exec/exit
P_PROFIL 0x00020 Has started profiling
P_SELECT 0x00040 Selecting; wakeup/waiting danger
P_SINTR 0x00080 Sleep is interruptible
P_SUGID 0x00100 Had set id privileges since last
exec
P_SYSTEM 0x00200 System proc: no sigs, stats or
swapping
P_TIMEOUT 0x00400 Timing out during sleep
P_TRACED 0x00800 Debugged process being traced
P_WAITED 0x01000 Debugging process has waited for
child
P_WEXIT 0x02000 Working on exiting
P_EXEC 0x04000 Process called exec
P_NOSWAP 0x08000 Another flag to prevent swap out
P_PHYSIO 0x10000 Doing physical I/O
P_OWEUPC 0x20000 Owe process an addupc() call at
next ast
P_SWAPPING 0x40000 Process is being swapped
lim The soft limit on memory used, specified via a call to
setrlimit(2).
lstart The exact time the command started, using the ``%c'' format
described in strftime(3).
nice The process scheduling increment (see setpriority(2)).
rss the real memory (resident set) size of the process (in 1024 byte
units).
start The time the command started. If the command started less than
24 hours ago, the start time is displayed using the ``%l:ps.1p''
format described in strftime(3). If the command started less
than 7 days ago, the start time is displayed using the
``%a6.15p'' format. Otherwise, the start time is displayed using
the ``%e%b%y'' format.
state The state is given by a sequence of letters, for example,
``RWNA''. The first letter indicates the run state of the pro-
cess:
D Marks a process in disk (or other short term, uninter-
ruptible) wait.
I Marks a process that is idle (sleeping for longer than
about 20 seconds).
R Marks a runnable process.
S Marks a process that is sleeping for less than about 20
seconds.
T Marks a stopped process.
Z Marks a dead process (a ``zombie'').
Additional characters after these, if any, indicate additional
state information:
+ The process is in the foreground process group of its
control terminal.
< The process has raised CPU scheduling priority.
> The process has specified a soft limit on memory require-
ments and is currently exceeding that limit; such a pro-
cess is (necessarily) not swapped.
A the process has asked for random page replacement
(VA_ANOM, from vadvise(2), for example, lisp(1) in a
garbage collect).
E The process is trying to exit.
L The process has pages locked in core (for example, for
raw I/O).
N The process has reduced CPU scheduling priority (see
setpriority(2)).
S The process has asked for FIFO page replacement (VA_SEQL,
from vadvise(2), for example, a large image processing
program using virtual memory to sequentially address
voluminous data).
s The process is a session leader.
V The process is suspended during a vfork.
W The process is swapped out.
X The process is being traced or debugged.
tt An abbreviation for the pathname of the controlling terminal, if
any. The abbreviation consists of the three letters following
/dev/tty, or, for the console, ``con''. This is followed by a
``-'' if the process can no longer reach that controlling termi-
nal (i.e., it has been revoked).
wchan The event (an address in the system) on which a process waits.
When printed numerically, the initial part of the address is
trimmed off and the result is printed in hex, for example,
0x80324000 prints as 324000.
When printing using the command keyword, a process that has exited and
has a parent that has not yet waited for the process (in other words, a
zombie) is listed as ``'', and a process which is blocked while
trying to exit is listed as ``''. Ps makes an educated guess as
to the file name and arguments given when the process was created by
examining memory or the swap area. The method is inherently somewhat
unreliable and in any event a process is entitled to destroy this infor-
mation, so the names cannot be depended on too much.
The ucomm (accounting) keyword can, however, be depended on.
KEYWORDS
The following is a complete list of the available keywords and their
meanings. Several of them have aliases (keywords which are synonyms).
%cpu percentage cpu usage (alias pcpu)
%mem percentage memory usage (alias pmem)
acflag accounting flag (alias acflg)
command command and arguments
cpu short-term cpu usage factor (for scheduling)
flags the process flags, in hexadecimal (alias f)
gid the effective gid
inblk total blocks read (alias inblock)
jobc job control count
ktrace tracing flags
ktracep tracing vnode
lim memoryuse limit
logname login name of user who started the process
lstart time started
majflt total page faults
minflt total page reclaims
msgrcv total messages received (reads from pipes/sockets)
msgsnd total messages sent (writes on pipes/sockets)
nice nice value (alias ni)
nivcsw total involuntary context switches
nsigs total signals taken (alias nsignals)
nswap total swaps in/out
nvcsw total voluntary context switches
nwchan wait channel (as an address)
oublk total blocks written (alias oublock)
p_ru resource usage (valid only for zombie)
paddr swap address
pagein pageins (same as majflt)
pgid process group number
pid process ID
poip pageouts in progress
ppid parent process ID
pri scheduling priority
re core residency time (in seconds; 127 = infinity)
rgid real group ID
rlink reverse link on run queue, or 0
rss resident set size
rsz resident set size + (text size / text use count) (alias rssize)
rtprio realtime priority (101 = not a realtime process)
ruid real user ID
ruser user name (from ruid)
sess session pointer
sig pending signals (alias pending)
sigcatch caught signals (alias caught)
sigignore ignored signals (alias ignored)
sigmask blocked signals (alias blocked)
sl sleep time (in seconds; 127 = infinity)
start time started
state symbolic process state (alias stat)
svgid saved gid from a setgid executable
svuid saved uid from a setuid executable
tdev control terminal device number
time accumulated cpu time, user + system (alias cputime)
tpgid control terminal process group ID
tsess control terminal session pointer
tsiz text size (in Kbytes)
tt control terminal name (two letter abbreviation)
tty full name of control terminal
uprocp process pointer
ucomm name to be used for accounting
uid effective user ID
upr scheduling priority on return from system call (alias usrpri)
user user name (from uid)
vsz virtual size in Kbytes (alias vsize)
wchan wait channel (as a symbolic name)
xstat exit or stop status (valid only for stopped or zombie process)
Related:
kill - Stop a process from running
ps - Process status
